Midmark / Ritter M9 UltraClave (new style)

  • Completely Reconditioned with One Year Parts & Labor Warranty
  • Overall length: 20.4″
  • Overall width: 15.3″
  • Overall height w/printer: 15.8″
  •  Chamber:  9″ diameter X 15″ depth
  • 3.5 gallons usable volume
  • Unit weight: 73 lb
  • Water reservoir capacity: 1.1 gallon
  • Electrical requirements: 115 VAC, 50/60 Hz, 15 Amps Single Phase
  • Meets the requirements of ASME Boiler and Pressure Vessel Code

Description

The Ritter M9 UltraClave packs all of the reliable sterilizing power you need into a compact unit perfect for areas with limited space. Today more than ever, you need products that are reliable and simple to use. Ritter M9 sterilizers are designed to be easier and are time tested for reliability. With any Ritter sterilizer, simply load it, set it and forget it. Select the cycle and the time is set for you. Press “Start” and the sterilizer will fill with the correct amount of water. Once the sterilization process is complete, the door opens automatically and quietly to dissipate the steam, giving you a fast drying time for your instruments. Less complexity means better reliability and a cost effective solution.

 

With our strong heritage of quality, value and reliability, you can’t go wrong with the M9 UltraClave. The M9 is simple to use and effective. Select your cycle and the time is set for you. Press “Start” and the M9 fills with the correct amount of water. Once the sterilization process is complete, the door opens automatically. The Steam–Flush Pressure Pulse Air Removal System ensures proper steam penetration throughout the chamber.And the M9 is convenient too,  with four pre-programmed and two programmable cycles.

 

The Midmark M9 UltraClave packs all of the reliable sterilizing power you need into a compact unit perfect for areas with limited space.  The Midmark M9 UltraClave is designed to optimize sterilization output—reducing time and effort, but not effectiveness. Today more than ever,  you need products that are reliable and simple to use. Select your cycle and the time is set for you. Press “Start” and the M9 fills with the correct amount of water. Once the sterilization process is complete, the door opens automatically.You simply load it – set it – and forget it. Select your cycle and the time is set for you. Press “Start” and the M9 fills with the correct amount of water. Once the sterilization process is complete, the door opens automatically and quietly to dissipate the steam, giving you fast drying time for your instruments. Features include:

  • Fills with correct amount of water when you hit the start button.
  • Door opens automatically to dissipate steam and give you the fastest drying time.
  • Built-in safety features such as overheat protection, a pressure relief valve and flashing “Error” light.
  • Pre-Programmed Controls for convenience

Just a few simple steps completes the sterilization process.  Simply press the Start / Standby button and the M9 automatically fills with the correct amount of water. Select the cycle that you want and the time is set for you. Cycle time from start to finish is 28 minutes (if cold) and 18 minutes (if hot) for unwrapped cycles.

  • Low water indicator light tells you when the reservoir level is too low
  • A door-ajar light tells you if the door is not securely closed
  • LED display shows the units temperature during heat-up and time remaining during cycles.
  • Lights turn on progressively during filling, heating, sterilizing, drying and complete stages.
  • Easy to fill and to drain water  – located at the front of the machine
  • A large capacity water reservoir means you fill it less often!
  • Four stainless steel trays come with the unit (two large, two small)
  • Easy-to-read pressure gauge and electronic controls offer simple operation and reduce down time

 

Ops Manual Tech Manual Brochure Cleaning